DATAQ DI-730 Heavy Industrial Ethernet Data Acquisition Instruments

DI-730 For Electric Motor/Generator Maintenance,and Troubleshooting in Mills, Locomotion, and DC Drive System applications.

    Product Highlights

  • NEW Synchronous and Distributed Data Acquisition
  • Measurement range of +/-10mV to +/-1000VDC (or peak AC) over six ranges
  • 1000V input-to-output and channel-to-channel isolation
  • Perfect for troubleshooting AC or DC motor drive systems. Measure field voltages and currents, control signals, RPM, and more.
  • Also for electric motor/generator maintenance and troubleshooting in mills and locomotion
  • DI-730s easily replace bulky chart recorders
  • Replace entire racks of isolation amps, high & low voltage amps, and data acquisition subsystems with one, portable, lightweight, 9 x 7 x 1 1/2 inch instrument
  • 14-bit resolution
  • Printer Port interface is standard, USB or Ethernet interfaces are optional
  • Ethernet Option supports synchronous and distributed data acquisition up to 100 meters apart. For greater distances between units, use the DI-789 Repeater Switch.
Description

The DI-730 Series is a family of instruments that offers 14-bit, 150kHz waveform recording capability. They communicate through your PC's parallel port in EPP, bi-directional, or standard mode. Other optional communication interfaces include USB and Ethernet. Use the DI-730 for wide dynamic range measurements, especially those involving AC or DC electric motors. Examples include paper, aluminum, and steel mills, high speed trains, and rail and sea-going locomotion. The high sample rate, exceptional isolation, and CMR characteristics of the DI-730 make it very well suited for the maintenance and troubleshooting of DC drive systems. Other applications include motor/generator RPM measurements, supply voltage and current measurements, and field current measurements from drive-roll, braking, and take-up motors.

Printer Port, USB, or Ethernet Interface
  • DI-730 instruments are available with printer port, Ethernet, and universal serial bus (USB) communication interfaces. All instruments have a 25-pin male printer port connector for EPP, bi-directional, or standard mode parallel port communication with your PC. Options add Ethernet communication capability with a 10base-T Ethernet connector, or a USB port for universal serial bus communication. The optional communication interfaces cannot be used concurrently with the printer port.

    Distributed and Synchronous Ethernet Data Acquisition
  • Daisy chain multiple DI-730-ENs, DI-720-ENs, and/or DI-722-ENs for a fully synchronous distributed Ethernet Data Acquisition System.

    DI-730 Offers Isolation, Wide Dynamic Measurement Range
  • The 8-channel DI-730 Series features a measurement range of +/-10mV to +/-1000VDC (or peak AC) over six ranges with +/-1000V channel-to-channel and input-to-output isolation. Replace entire racks of isolation amps, high & low voltage amps, and data acquisition subsystems with one, portable, lightweight, 9 x 7 x 1 inch instrument. Channel-to-channel isolation protects delicate control circuits, computer equipment, and personnel from high common mode voltages.

    DI-730 Boasts An Award-Winning Design
  • The DI-730 is widely regarded as one of the most significant PC-based data acquisition developments for 1998 and 1999. It has won the IAN's Editor's Choice Award, Test and Measurement World's Best in Test Award, I&CS's Editor's Choice Award, and was chosen as one of EDN's Hot 100 Products of 1998.

    50kHz Burst Sampling A/D
  • Connect to DC or near DC signals like temperature, generator-based RPM, or other slow process variables. Sample rates well into the sub-Hertz range are possible. Use sample rates as high as 150,000 Hz for high speed applications such as modulated DC drives and other AC waveform situations.

    High Resolution Capability
  • DI-730 instruments apply 16- and 14-bits of resolution (respectively) to your measurement task.

    Easy to Connect and Use
  • All instruments connect in seconds to your PC's parallel port, Ethernet connector, or USB port using the supplied cable. The DI-730 Series has banana jacks for easy signal connection. Or use the DI-205, DI-705, DI-706, or CABL-4 signal interface options, which provide alternate methods for signal connection.

    Expansion Flexibility
  • Expand the analog channel capacity of DI-730 Series instruments now or anytime in the future with our DI-725, a 32-channel analog input expander backpack. Or choose our DI-75B, an eight-channel, signal conditioned analog input backpack that allows the DI-730 to make any conceivable industrial measurement with full isolation. If using the Ethernet interface, string multiple DI-730-ENs together to add more channels, or expand with DI-720-ENs and/or DI-722-ENs to form a distributed synchronous ethernet data acquisition unit.

    Includes WinDaq Software
  • Be up and running minutes out of the box with WinDaq acquisition and playback software. WinDaq/Lite software is included free with the purchase of every DI-730 instrument. WinDaq/Lite operates at a maximum throughput recording rate of 240 Hz with a DI-730 Instrument. Purchase WinDaq/Pro or WinDaq/Pro+ to record at the full sample rate. See the differences between all 3 versions of WinDaq Acquisition Software.
  • WinDaq Waveform Browser, our playback and analysis software for Windows, is distributed free with WinDaq/Lite and is included free with every WinDaq/Pro or WinDaq/Pro+ purchase. It is also available for download free-of-charge from this Web site. Use it to review, measure, compare, and analyze the waveform file after it has been recorded by WinDaq acquisition software. WinDaq software products support up to 14 bits of measurement resolution.

    Application In-Vehicle Testing
  • Engine/Hydraulics
  • Frame/Structural
  • Power Train

    Metal Mill applications
  • Steel strip mill
  • Continuous Pickle lines
  • Temper steel rolling mills
  • Continuous steel casting
  • Seamless steel pipe mills
  • Continuous aluminum casting
  • Aluminum rolling mills

    Pulp and paper mills
  • Wire processes
  • Presses
  • Dryers
  • Size presses
  • Calendars
  • Reelers
  • Unwinders and slitters

    PLC fine tuning and troubleshooting to detect:
  • Electrical sequencing variations and flaws
  • Mechanical valve actuation latencies
  • Motor timing conflicts
  • Hydraulic spikes or drop outs

    Structural wind/weather measurements and audits
  • Tall buildings
  • Long bridge spans
  • Floating platforms like oil rigs
  • Extended length vessels like super tankers

    Web printing press
  • The Advantages of Ethernet Data Acquisition

    Ethernet Data Acquisition systems provide a stable communications interface that can be accessed virtually anywhere. Advantages include:

  • Connects to any established Ethernet network with multiple drops
  • Inexpensive cabling
  • Uses TCP/IP Protocols and is accessible via the internet
  • Runs as far as 328 Feet (100 meters) are possible without hubs
  • Doesn't require Device Driver Installation
  • Additional pictures

    HMP50 Relative Humidity (RH) and Temperature probe

    app_01

    app_02

    DI-720

    DATAQ DI 1000TC

    DATAQ DI 725

    app_04

    DATAQ DI 710

    app_03

    Instruments Techno Test inc.

    Instruments Techno Test inc.
    2345, Michelin street, #100
    Laval, Qc
    H7L 5B9

    Téléphone : (450) 681-5777
    Télécopieur : (450) 681-3773

    Printed from: catalogue.techno-test.com/products/7-Power_Monitoring___Data_Logger/66-Data_acquisition_systems_Data_Logger/200-USB_Ethernet_data_logger/397-DATAQ_DI_730-DATAQ_DI_730_Heavy_Industrial_Ethernet_Data_Acquisition_Instruments.html
    Copyright © 2018 | Instruments Techno Test inc. | Reproduction interdite