WR8500 Series Thermal Arraycorders

Easy Operation High Speed Recording 8 to 16 Channels
The WR8500 series thermal arraycorders are economical, no-frills waveform recorders which feature a large-format LCD screen for waveform monitoring, and a performance level usually found in our more expensive recorders such as the WR9000. Chart speeds up to 200 mm/s are selectable from the front panel, and the sampling rate is a high-speed 4 μs. For users who need increased functionality, we offer a wide range of options such as logic amp input, floppy and MO disk drives, RS-232C and GPIB interfaces, additional memory, DC drive, and a Z-fold chart paper box.
  • Number of channels 8, 16
  • Measurement modes Recorder, Memory Recorder, and Logging
  • Memory capacity 64 kwords/channel (optionally expandable to 256 kwords/channel)
  • Display panel 8.9" LCD
  • Recording method Thermal recording by a thermal array print head of 8-dot/mm pitch
  • Chart paper Roll paper (part no. PR231A), 210 mm x 40 m, trace color: black
  • Recorded width 205 mm (1,640 dots) maximum
  • Isolation voltage 1 min at 1,500 VAC between the AC power supply and frame
  • Isolation resistance 20 MΩ or more at 500 VDC between the AC power supply and frame, and between the input terminals and frame
    Configuration

    Performance, reliability and ease of use. The WR8500 comes standard with three recording modes to suit your applications: Recorder, Memory Recorder, and Logging. In Recorder mode, the WR8500 displays and records analog signals as realtime waveforms, and it can also capture data into memory simultaneously. Voltage ranges are from 50 mV to 500 V, and logic input is available as an option. In Memory Recorder mode, data captured into memory can be displayed and recorded as waveforms. The WR8500 comes with a standard memory capacity of 64 kwords/channel, and an additional 256 kwords/channel memory is available as an option. In Logging mode, measured data is displayed and recorded as digital values. Data can be captured directly onto a floppy or MO disk. Graphtec's 8 dot/mm thermal array technology enables the information shown on the LCD panel to be accurately reproduced on chart paper. In addition to waveform recording up to 200 mm wide and printing of digital values, you can also print out a list of setup parameters, as well as a hard copy of the display screen. 11 formats are available for the 8- channel model in Y-T mode*2, and a 150 x 150 mm format in the X-Y mode. A selection of 9 grid patterns is also offered.

    Options
  • B-375 Logic amp 16 channels/unit
  • B-371 Floppy disk drive 3.5", 1.44 MB
  • B-364 Magneto-optic disk drive 3.5", 640 MB
  • B-364 Magneto-optic disk drive 3.5", 640 MB
  • B-372 RS-232C interface
  • B-363 GP-IB interface Conforms to IEEE-488-1978
  • B-373 Additional memory 256 kwords/ch, for 8-ch model
  • B-374 Additional memory 256 kwords/ch, for 16-ch model
  • B-376 DC drive 10 to 16 VDC, for 8-ch model
  • B-377 DC drive 10 to 16 VDC, for 16-ch model
  • B-367 Long-length Z-fold paper box For use with PZ231A 100-m length Z-fold paper
  • WR8500 Interface WR8500 RS-232C and GP-IB Control Commands
  • UM-351 Command Manual

    Feature

  • Easy operation--just like an analog recorder
  • Three recording modes for diverse measurement scenarios
  • Wide-format recording and display
  • File Conversion Software

    Main Feature

  • Cursor Readout function
  • Scrolling function
  • Storage of data in the cursor-specified range
  • Statistical Calculation functions
  • Print function
  • A remote interface (CMOS level) which enables start/stop control of the recorder using external signals is built in.
  • The WR8500 can perform the following 7 cursor-specified statistical calculations

    Software

    Graphtec's OPS011 file conversion software (Windows version) converts data stored on the WR8500's floppy or MO disks into TXT or CSV formats so that it can be used with spreadsheet applications such as Microsoft's Excel or Lotus 1-2-3.

     

     

     

  • Additional pictures

    GL1000

    GL500A midi Logger Dual

    WR300

    GL800

    AMP

    WR3320 roll-chart

    WR300 Z-Fold

    Instruments Techno Test inc.

    Instruments Techno Test inc.
    2345, Michelin street, #100
    Laval, Qc
    H7L 5B9

    Téléphone : (450) 681-5777
    Télécopieur : (450) 681-3773

    Printed from: catalogue.techno-test.com/products/7-Power_Monitoring___Data_Logger/66-Data_acquisition_systems_Data_Logger/146-WR8500-WR8500_Series_Thermal_Arraycorders.html
    Copyright © 2017 | Instruments Techno Test inc. | Reproduction interdite