DATAQ DI-715B Data Logger

Stand-alone or PC-connected Data Logger, Option Allows Data to be Saved to Removable SD Memory. Accepts Fully Isolated Plug-In Amplifiers. (Not recommended for most new applications. See the DI-718B as a less costly alternative.)

    Product Highlights

  • Low-Cost, Portable, Ethernet Data Logger (USB to Ethernet converter available). This product is similar to the DI-710 Data Logger but with Signal Conditioned inputs. See also the DI-718B series for many of the same features but in a much smaller package using DI-8B modules.
  • 8 signal-conditioned analog inputs. Add 8 more with the DI-75B backpack.
  • Stand-alone data logger option allows in-the-field measurements to be saved to Secure Digital Cards (SD).
  • 14-bit analog to digital conversion.
  • Use the AC/DC Current Probe for measuring in cable bundles and tighter areas.
  • Includes WinDaq Software.
  • Record up to 14,400 samples per second (assumes SD latencies of 80 milliseconds or less) with Stand-alone models or up to 4,800 samples per second with PC-connected instruments (WinDaq/HS required to achieve recording rates over 1,108 Hz with PC-connected instruments).
  • Wide variety of measurement functions and ranges based on DI-5B module selections.
Description

The DI-715B is an eight-channel, 5B-module data logger system. Each DI-715B accepts up to eight high-performance, plug-in (DI-5B) signal conditioning modules to include virtually any isolated, industrial-type signal. Because DI-5B modules are identical in pinout and size, they can be mixed or matched in any combination. Choose from thermocouple, true rms, voltage, strain, frequency, process current, RTD, potentiometric, or DC transducer-whatever suits your application. A clear acrylic front panel allows easy identification of all installed 5B modules.

The DI-715B Series provide an option for PC-connected or stand-alone data logger operation. Instruments with the stand-alone data logger option feature a built-in multimedia socket that accepts standard Secure Digital (SD) memories to which acquired data may be stored without a connected PC. SD memories are the same commonly available mass storage devices used with digital cameras and MP3 players. Memories ranging in size from 32MB to 2GB are supported. Instruments without this option must remain tethered to a PC's USB or Ethernet port during data acquisition and use the PC's own program and memory to store acquired data. Software selectable gain ranges of 1, 2, 4, and 8 are supported.

Make Industrial Measurements Through DI-5B Plug-in Signal Conditioning Modules
  • Each channel on the DI-715B accomodates one DI-5B module providing a single channel of isolated input protection, amplification, and filtering. DI-5B modules are plugged into a socketed backplane and are secured with a mounting screw. Each DI-715B channel has 4 corresponding screw terminals for your signal connections: channel +, channel-, excitation +, and excitation -. These terminals satisfy all transducer inputs and provide sensor excitation if necessary. Access to the DI-5B modules is through a removable front panel.

    Powerful Data Acquisition Server Capability
  • DI-715B Stand-alone data loggers are the first in their price range to offer data acquisition server capability. Acting as a server allows stand-alone instruments to locally and independently acquire data to their memory cards, and then make that acquired data available upon demand, either by plugging the memory card into a reader, or uploading via the Ethernet interface.
    Ethernet-enabled DI-715Bs provide the most power and flexibility. A DI-715B with an Ethernet interface and built-in memory transparently becomes like any other computer on a network, able to share recorded data over a network to a PC on the other side of the facility, or over the Internet to a PC on the other side of the world. These stand-alone instruments can be added easily and seamlessly to existing networks without incremental bandwidth burdens, storing data in memory and uploading on demand. Stand-alone data loggers can also be controlled locally using multifunction push-button control and multi-colored, red, green, orange LED status indicator. To learn more about the DI-715B's powerful stand-alone capabilities.

    Recommended Memory Card
  • For optimal performance, DATAQ Instruments, Inc. recommends using a Lexar Professional 133X 1 Gigabyte Secure Digital Flash Memory Card to record your data. Memory cards are available through our online store.

    Fast Throughput Rate
  • Supports sample throughput rates to 14400 samples per second (assumes SD latencies of 80 milliseconds or less) to SD with stand-alone Models and 4800 samples per second to PC with PC-connected Models. WinDaq/HS is required to achieve recording rates over 1,108 Hz with PC-connected instruments.

    Easy to Connect & Use
  • Installs in seconds. Simply connect to your computer's USB port or an Ethernet port using the supplied cable. Connect power, then connect your signals to the provided screw terminal blocks. Stand-alone models just need a memory card and power.

    Expandable
  • Add 8 more signal conditioned input channels with a DI-75B 5B module backpack. Fully mountable with optional stacking brackets.

    Includes WinDaq Software
  • Be up and running minutes out of the box with WinDaq acquisition and playback software. WinDaq/Lite software is included free with the purchase of every DI-715B instrument. WinDaq/Lite operates at a maximum throughput recording rate of 1,108 Hz with a DI-715B Instrument. A special version of WinDaq acquisition software may be purchased (WinDaq High Speed Option) allowing you to record data at the speed of the instrument (up to 4800 Hz).
    WinDaq Waveform Browser, our unrestricted playback and analysis software for Windows, is also included free with the purchase of every DI-715B. Use it to review, measure, compare, and analyze the waveform file after it has been recorded by WinDaq acquisition software. WinDaq software products support up to 14 bits of measurement resolution.

    The Advantages of Ethernet Data Acquisition

    Ethernet Data Acquisition systems provide a stable communications interface that can be accessed virtually anywhere. Advantages include:

  • Connects to any established Ethernet network with multiple drops
  • Inexpensive cabling
  • Uses TCP/IP Protocols and is accessible via the internet
  • Runs as far as 328 Feet (100 meters) are possible without hubs
  • Doesn't require Device Driver Installation

    • Additional pictures

    DI-194 RS

    DI-158 Starter Kit

    DI-720

    DATAQ DI 1000TC

    DATAQ DI 730

    DATAQ DI 725

    DI-718B Data Logger

    DATAQ DI 710

    DI-148U Starter Kit

    Instruments Techno Test inc.

    Instruments Techno Test inc.
    2345, Michelin street, #100
    Laval, Qc
    H7L 5B9

    Téléphone : (450) 681-5777
    Télécopieur : (450) 681-3773

    Printed from: catalogue.techno-test.com/products/7-Power_Monitoring___Data_Logger/66-Data_acquisition_systems/405-DATAQ_DI_715B-DATAQ_DI_715B_Data_Logger.html
    Copyright © 2010 | Instruments Techno Test inc. | Reproduction interdite