Quadtech 1730 T LCR Meter

With Turns Ratio for Transformer Testing

    Features

  • 14 Measurement Parameters
  • 0.1% Basic Measurement Accuracy
  • 10 Test Frequencies: 50Hz-100kHz
  • Test Voltage: 10mV-1V
  • Measurement Speeds up to 62/second
  • Monitor DUT Voltage and Current
  • Large High Res. Graphic Display
  • IEEE and Handler Interfaces, Std.
  • Automatic Open/Short Zeroing
  • Pass/Fail Binning (8)
  • Storage/Recall of 50 Setups
  • Measurement Averaging (1-256)
  • Measurement Delay (0-10 seconds)
  • Programmable Source Impedance
  • DC Bias Voltage (0-5V)
  • Keypad Lockout
  • Easy Operation
  • Cable Correction 0-4M
  • Turns Ratio & DCR Measurements
    Introduction

    The QuadTech 1730T LCR Meter is an easily programmable, microprocessorbased high performance passive component tester with excellent low impedance measurement and fast measurement speeds even at 100/120Hz. It measures 16 different parameters with a basic accuracy of 0.1%. Programmable test frequency, speed, mode and voltage permits great versatility in component and materials testing. Standard IEEE-488 and Handler interfaces provide data transfer and component automation applications for faster production line testing.

    USES:
  • Transformer/Coil Testing
  • Production Testing
  • Component Screening
  • Material Testing
  • Quality Assurance Testing
  • Component Design and Evaluation

    Includes:
  • 4200-0300 AC Power Cord
  • 150821 Instruction Manual
  • 520026/520138 Power Line Fuses (1.0A 250V/0.5A 250V)
  • 1700-03 Kelvin Test Leads: 4 BNC to 2 Kelvin Clips
  • 630166 Transformer Test Fixture: 4 BNC to 4 Alligator Clips
  • Calibration Certificate Traceable to NIST

    Optional Accessories
  • B/A Calibration Data
  • 1700-01 Axial/Radial Component Test Fixture
  • 1700-02 Axial/Radial Remote Test Fixture
  • 1700-03 Kelvin Lead Set: 4 BNC Connectors to 2 Kelvin Clips
  • 1700-04 4 BNC Connectors to 4 Banana Plugs
  • 7000-01 BNC to BNC Cable Lead Set (1m)
  • 7000-02 BNC to BNC Cable Lead Set (2m)
  • 7000-05 Lead Set: 4 BNC Connectors to Chip Component Tweezers
  • 7000-07 Low Voltage Chip Component Test Fixture
  • 630166 Transformer Test Fixture: 4 BNC to 4 Alligator Clips

Other Capabilities:
  • Capacitance meters, impedance meters, inductance meters for component testing

    Model no. 1910 CE LCR Meter 1920 CE LCR Meter 7600 Plus LCR Meter 1715 CE LCR Meter 1730T LCR Meter
    KEY FEATURES
    Accuracy (+/-) 0.1% LCR 0.001 DQ 0.18 degree 0.1% LCR 0.001 DQ 0.18 degree 0.05% LCR 0.005 DQ 0.18 degree AutoAcc 0.2% LCR 0.002 DQ 0.1% LCR 0.001 DQ
    Test Frequency 20Hz - 1MHz 20Hz - 1MHz 10Hz - 2MHz 100, 120, 1k, 10kHz 100, 120, 1k, 10k, 20k, 50k & 100k Hz
    Measured Parameters L, C, R, Z, D, Q, θ, Y, G, B, ESR, DCR L, C, R, Z, D, Q, θ, Y, G, B, ESR, DCR L, C, R, Z, D, Q, θ, Y, G, B L, C, R, Z, D, Q, θ, X L, C, R, Z, D, Q, θ, X
    Speed Up to 40 meas/sec Up to 40 meas/sec Up to 120 meas/sec Up to 25 meas/sec Up to 62 meas/sec
    Test Voltage 20mV - 1.0V 20mV - 1.0V 20mV - 5.0 0.25V - 1.0V 10mV - 1.0V
    Test Current No No 250uA - 100mA No No
  • Additional pictures

    Quadtech 1715 CE Front

    Quadtech 1920 Front

    Quartech 1730T Precision LCR Meter

    Quadtech 1730 T Front

    Quadtech 1715 LCR Meter

    Quadtech 1910 Front

    Quadtech 1910 LCR Meter

    Quadtech 1920 LCR Meter

    Instruments Techno Test inc.

    Instruments Techno Test inc.
    2345, Michelin street, #100
    Laval, Qc
    H7L 5B9

    Téléphone : (450) 681-5777
    Télécopieur : (450) 681-3773

    Printed from: catalogue.techno-test.com/products/1-Test___Measurement/9-Multimeter___Clamp_On___LCR/14-LCR_Meters/527-1730_T-Quadtech_1730_T_LCR_Meter.html
    Copyright © 2014 | Instruments Techno Test inc. | Reproduction interdite